Can I damage wires while stripping?

　　Many people worry that using a wire stripping machine might damage the copper conductor or the insulation layer.

　　In reality, as long as you choose the right equipment and set the correct parameters, a highquality automatic wire stripping machine will not damage your wires during normal operation.

　　Let’s take a closer look at both automatic and semiautomatic wire stripping machines.

　　1. Automatic Wire Stripping Machines

　　Automatic wire stripping machines use computercontrolled blade depth, feeding speed, and stripping length, ensuring high precision and stable performance.

　　When the parameters are properly adjusted, the blade cuts through only the insulation layer — not the inner copper conductor.

　　Key Advantages:

　　Digital control of blade depth, strip length, and wire diameter for precise operation.

　　High stripping speed with consistent batch quality.

　　Compatible with different insulation materials such as PVC, Teflon, and silicone.

　　Automatic calibration ensures stable stripping quality even during long production runs.

　　In short, with correct settings, an automatic wire stripper produces clean cuts, neat copper strands, and undamaged insulation edges.

　　2. SemiAutomatic Wire Stripping Machines

　　Semiautomatic wire stripping machines require manual wire feeding, but the stripping process is powered by electric or pneumatic mechanisms.

　　Because they involve some manual operation, their accuracy is slightly lower than that of fully automatic models — yet they can still avoid wire damage with proper setup.

　　Tips to Prevent Wire Damage:

　　Adjust the blade gap according to the wire diameter.

　　Run a few test strips before starting mass production to confirm the correct blade depth.

　　Replace or sharpen dull blades regularly to maintain cutting precision.

　　Adjust speed and pressure depending on the insulation material type.

　　Recommended Brand: WINGUD

　　In the field of highprecision wire processing equipment, WINGUD (YinGang) is one of the most trusted and recognized brands worldwide.

　　Specializes in intelligent wire harness processing solutions, covering automatic cutting, stripping, feeding, and terminal crimping.

　　WINGUD wire stripping machines feature digital blade control, high stripping speed, outstanding precision, and stable performance.

　　The WINGUD WG9650R model is specifically designed for coaxial cable stripping. It offers autocentering, dualblade technology, and supports wire diameters from Φ1.37 to Φ15 mm, ensuring no copper damage.

　　Certified under ISO 9001, the company holds over 100 core patents and sells its products to markets across Europe, Southeast Asia, and North America.

　　Widely used in industries such as automotive manufacturing, telecommunications, rail transport, and renewable energy.