How to Choose a 50mm² Automatic Feeding and Stripping Machine

Time:2025-12-12Viewed:()

　　When processing 50mm² heavygauge cables, selecting the right equipment is far more challenging than with smaller wires. Large diameter, hard insulation, and heavy weight all create high load on the machine. If the automatic feeding system is unstable, stripping accuracy cannot be guaranteed.

　　Therefore, choosing a truly suitable 50mm² automatic feeding and stripping machine requires evaluating power, stability, structure, and automation.

　　1. The Automatic Feeding System Must Be Powerful

　　50mm² cables have thick insulation and high friction. Without sufficient feeding torque, problems easily occur:

　　• Slipping

　　• Offposition feeding

　　• Large length deviations

　　The machine should include:

　　• Hightorque servo feeding

　　• Wide, wearresistant feeding wheels

　　• Antislip compensation algorithms

　　Stable feeding is the foundation of accurate stripping.

　　2. The Blade System Must Handle HeavyGauge Cable

　　For thick cables, stripping quality depends on blade strength and depth accuracy. Choose machines equipped with:

　　• Heavyduty alloy blades

　　• Independent microadjustable bladedepth control

　　• Multistage stripping capability (e.g., incision + peeling steps)

　　With proper depth and blade stability, the copper core stays undamaged and the insulation is cleanly removed.

　　3. A Strong Support and Clamping Structure

　　A 50mm² cable is heavy enough to cause deflection if support is insufficient. This affects stripping position accuracy. A suitable machine should feature:

　　• A reinforced steel frame

　　• Strengthened guiding structure

　　• Automatic centering clamps

　　The thicker the cable, the more the structure needs to resist torsion and deformation.

　　4. Automation Features Improve Efficiency

　　If your production requires higher throughput, consider machines with:

　　• Auto zerocalibration

　　• Touchscreen recipe memory

　　• Automatic clampingforce adjustment

　　• Fault diagnostics and maintenance reminders

　　These features greatly reduce setup time and improve continuous production efficiency.

　　5. Choose Based on Production Volume and Budget

　　Common categories include:

　　•Basic models: suitable for occasional 50mm² processing; lower cost, moderate speed

　　•Midrange models: stronger feeding, precise blade depth; ideal for longterm production

　　•Highend models: fullservo control, intelligent compensation; designed for largescale newenergy and powercable manufacturing

　　For daily highvolume workloads, midtohighend machines offer better longterm cost performance.